boride

boride怎么读

英式音标：[\'bɔ:raɪd]

美式音标：[\'bɔraɪd]

boride的意思释义

n.

硼化物；

英英释义

In chemistry a boride is a chemical compound between boron and a less electronegative element, for example silicon boride (SiB3 and SiB6). The borides are a very large group of compounds that are generally high melting and are not ionic in nature.

boride用法及例句

双语例句

用作名词(n.)

Boron and boride have been widely applied to modern industry.

摘要硼及其硼化物在现代工业中有着广阔的应用前景。

The conclusion can be used to guide the manufacturing of ternary boride cermets cladding parts.

本文的研究结果对于三元硼化物金属陶瓷硬质覆层零件的制造具有实际意义。

例句参考

Carbide, Nitride and Boride Materials Synthesis and Processing

Carbide, Nitride and Boride Materials Synthesis and Processing

Cobalt boride catalysts for hydrogen generation from alkaline NaBH 4 solution

Molybdenum boride and carbide catalyze hydrogen evolution in both acidic and basic solutions.

Superconductivity at 23 K in yttrium palladium boride carbide

Superconductivity in the metal rich Li-Pd-B ternary boride.

NANOPARTICULATE METAL BORIDE COMPOSITION AND ITS USE FOR IDENTIFICATION-MARKING PLASTIC PARTS

Electronic properties of superconducting LuNi 2 B 2 C and related boride carbide phases

Characterisation and high temperature mechanical properties of zirconium boride-based materials

boride相关例句

1. The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.

研究采用铸渗法制备三元硼化物硬质合金覆层钢基材料。

2. Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.

在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。

3. New type cemented carbide of ternary complex boride base prepared by reaction boronizing sintering technique has excellent physical, chemical and mechanical properties.

反应硼化烧结法制备的三元复合硼化物基新型硬质合金，具有优良的物理、化学、力学性能。

4. The reaction sintering process and production process of ternary boride base cermet produced by reaction sintering method were introduced.

介绍了用反应烧结法制备三元硼化物基金属陶瓷的反应烧结过程及一般制备工艺过程；

5. Otherwise, a kind of needle-shaped boride will appcar on the surface of specimen.

本文重点研究了这种针状硼化物的形成机理及其影响因素。

6. The ternary boride base cermets have exhibited good mechanical properties and excellent wear and corrosion resistance.

指出三元硼化物基金属陶瓷具有良好的机械性能和杰出的耐磨、耐蚀等性能；

7. The high magnification morphology of boride layer, transition zone and surface were observed by means of scanning electron microscopy (SEM).

借助于扫描电镜（SEM），观察了高倍下硼化物层、过渡区和表面的形貌；

8. A ternary boride cermet clad material was fabricated on the Q235 steel substrate by means of the vacuum liquid phase sintering technique.

采用真空液相烧结法，在Q235钢表面制备三元硼化物基金属陶瓷覆层材料。

9. Metallic compounds include boride, silicious and compound carbide, etc.

金属化合物有硼化物、硅化物、复合碳比物等。

10. The mechanism of both forming boride and transferring of boron in the aluminized and then boromized layer were discussed.

探讨了热浸扩散渗铝复合渗硼中的硼化物的形成机理及硼的迁移机制。

11. Microstructures of carbide and boride reinforced respectively titanium alloy matrix composites by different fabrication methods were reviewed.

论述了不同制备方法中分别以碳化物和硼化物为增强相的钛基复合材料的微观组织。

12. Some treatment parameters led to boron carbon coating above the boride layer which acts as a diffusion barrier and prevents a further growth of the boride layer.

一些处理参数会导致在硼化物层上形成硼-碳层，它将起着扩散垒的作用，阻止了硼化物进一步的生长。

13. Analysis and observation under electron microscope indicated that it seems to attribute the notch sensitivity of the alloy to the film-like boride along the grain boundaries substantially.

电子显微镜观察与分析表明，晶界上的薄膜状硼化物是导致合金缺口敏感的主要原因。

16. Boron and carbon are the important elements that can decide boride and matrix respectively, and their contents affect the microstructure and properties of the HBIA greatly.

硼、碳分别是决定硼化物和基体的重要元素，其含量对组织和性能起决定作用。

21. The activated boron atoms come from the boron atoms which decomposed by boriding medium and gaseous boride.

微波场下的渗硼层形成所需的硼原子来源于介质分解的活性硼原子和气态硼化物分解的硼原子。

22. Novel water based organic boride SW-2 was synthesized using boric acid as a reactant.

用硼酸作为反应起始物，合成了一种新型的水溶性有机硼化合物SW-2。

23. Study metallographic structure of phosphor eutectic and boride in continuous cast iron. The microstructure of piston has been analyzed and proved after wear test.

研究水平连续铸造方式下高磷含硼铸铁中磷共晶和硼化物的分布特点，并进行超耐磨性试验，对磨损试验后材料的微观形貌进行试验验证分析。

24. Powder metallurgy HSS (PM HSS) has been Strengthened successfully at the temperature of 1192℃ using reaction sintering technology by composing with ternary boride based cermet (TBBC).

用反应硼化烧结法在1192℃下真空烧结，成功制备出高耐磨的粉末高速钢与三元硼化物陶瓷的复合材料。

25. Boron and boride have been widely applied to modern industry.

硼及其硼化物在现代工业中有着广阔的应用前景。

26. Using scanning electron microscope observation comparison carbonization boride cermet processing surface elastic performance and processing surface deterioration level.

利用扫描电镜观察、比较碳化硼陶瓷加工表面弹性性能及加工表面变质层。

27. This paper deals with the crevice structure in boride layer.

对渗硼层中的夹缝组织进行了分析研究。

28. This paper deals with the crevice structure in boride layer.

对渗硼层中的夹缝组织进行了分析研究。

29.boride ceramics

硼金属陶瓷

30.boride cermet

硼[金属]陶瓷

32.chromium boride

硼化铬

33.strontium boride

硼化锶

34.beryllium boride

硼化铍

35.samarium boride

硼化钐

36.boride refractory

硼化物耐火材料

37.aluminum boride

硼化铝

38.lanthanum boride

硼化镧