carbide

carbide怎么读

英式音标：[\'kɑ:baɪd]

美式音标：[\'kɑbaɪd]

carbide基本解释

[无化] 碳化物

carbide的意思释义

n.

碳化物；硬质合金；

英英释义

n.a binary compound of carbon with a more electropositive element

carbide用法及例句

双语例句

用作名词(n.)

The orifices of this nozzle are almost chocked up with carbide.

这个油嘴的喷孔几乎被碳化物堵死。

例句参考

Synthesis and characterization of carbide nanorods

Oriented Silicon Carbide Nanowires: Synthesis and Field Emission Properties

Platinum-Like Behavior of Tungsten Carbide in Surface Catalysis

Coaxial nanocable: silicon carbide and silicon oxide sheathed with boron nitride and carbon

Status of Silicon Carbide (SiC) as a WideBandgap Semiconductor for HighTemperature Applications: A Review

Laser produced functionally graded tungsten carbide coatings on M2 high-speed tool steel

Towards wafer-size graphene layers by atmospheric pressure graphitization of silicon carbide.

Electrical and optical properties of amorphous silicon carbide, silicon nitride and germanium carbide prepared by the glow discharge...

Direct catalytic conversion of cellulose into ethylene glycol using nickel-promoted tungsten carbide catalysts.

carbide词源

carbide (n.)

compound formed by combination of carbon and another element, 1848, from carb-, comb. form of carbon + chemical suffix -ide. The earlier word was carburet.

carbide相关例句

1. A solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensite .

含铁碳化物或含碳铁的固体溶体，冷却可形成珠光体或马氏体。

tw.websaru.com

2. Cleanup corrosive substance in pipe such as internal water, clean oil, methane hydrate, ferric oxide, carbide dust, carbon bisulfide, hydrosulphurice acide, etc.

清除管线内部积水、轻质油、甲烷水合物、氧化铁、碳化物粉尘、二硫化碳、氢硫酸等腐蚀性物质；

dict.site

3. Spheroidizing is a form of annealing which, in the process of heating and cooling steel, produces a rounded or globular form of carbide-the hard constituent in steel.

球化是退火的一种形式，在钢铁的加热和冷却过程中，退火产生了圆形或球形碳化物-钢铁中的硬结构。

5. At the same time micro texture such as superfine crytocrystal martensite and particulate carbide at the crack cusp significantly enhanced its hardness obdurability and wearability .

同时在裂纹尖端处得到了超细化的隐晶马氏体和细粒碳化物等微观组织，极大提高了裂纹尖端处的硬度、韧性和耐磨性。

7. Silicon carbide, known commercially as carborundum, is formed of carbon and silicon atoms arranged in a diamond-like pattern, which results in diamond-like properties.

硅碳化合物，商业上叫做金刚砂，是由碳和硅原子呈钻石结构地结合在一起，所以有一些钻石的属性。

zuci.chaziwang.com

8. Finally, the slight crackle fissures along the direction of undissolved carbide and crystal boundary, and .

裂纹沿未溶碳化物和晶界走向开裂，说明未溶碳化物降低了晶界处结合强度。

9. Dow Chemicals later took over Union Carbide.

随后，陶氏化学接手联合碳化物公司。

zuci.chaziwang.com

10. The results revealed that the non homogeneous distribution of the carbide caused the \"zonal structure\" appeared in the joint of drill rod which is hardened and hightemperature tempered.

结果表明，碳化物分布不均匀导致调质处理后在钻杆接头中产生“带状组织”。

11. The new technology and new process instead of traditional technology and equipment in PVC production by calcium carbide method were introduced.

前言：介绍了在电石法PVC生产中利用新技术与新工艺改造传统技术和设备的情况。

12. The optimum M30 carbide synthesis performance realization project is presented based on the carbide insert cutting experiment results analysis.

通过分析合金刀片切削试验结果，提出了M30牌号合金较佳综合性能的实现方案。

13. But he had never considered this an imposition and had actually sometimes felt a sense of superiority because the pullers of ramshackle rickshaws could not afford carbide lamps.

可是在平日，他并不觉得这有什么说不过去；有时候揣上它，他还觉得这是一种优越，那些拉破车的根本就用不上电石灯。

14. For carbide glass ceramics stone precious stones and other heavy-load cutting grinding wear resistance .

用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。

16. The influence on propylene epoxide by lots of mechanical admixture and chemical admixture in carbide slag, and the instability factors in production control were introduced.

介绍了电石渣中的大量机械杂质和化学杂质对环氧丙烷生产的影响及由其所引起的生产控制方面的不稳定因素。

17. The influence of bias enhanced nucleation(BEN) to the adhesion between diamond coating and WC-6%Co carbide cutting tool is researched with the microwave plasma (CVD) instrument.

在微波等离子体化学气相沉积装置中，研究了负偏压形核对金刚石薄膜与WC 6 %硬质合金刀具附着力的影响。

zuci.chaziwang.com

18. Layers of carbon and silicon carbide contain the radioactive material.

层层碳和金刚砂包裹着这个放射性材料。

zuci.chaziwang.com

19. At the center of each poppy seed-size fuel particle is a uranium kernel. Layers of carbon and silicon carbide contain the radioactive material.

每一颗罂粟籽大小的燃料粒子中心是一个铀核。层层碳和金刚砂包裹着这个放射性材料。

zuci.chaziwang.com

20. The inner mechanical seal shall BE constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face.

内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。

dict.bigear.cn

21. With theoretical analysis and experimental research, the regularity of wear cumulation of carbide tools under varying cutting speed conditions is studied .

通过理论分析和试验研究，探讨硬质合金刀具在变速切削条件下磨损累积的规律。

22. A new nickel silicon carbide deposit and cadmium lead free EN plating process.

新型无铅无镉，碳化矽复合镀镍磷合金工艺，镀层耐磨。

25. Generally choose gesso more boron hydrates, zinc carbide and aluminum hydroxide, magnesium hydroxide.

一般选用结晶水较多的硼化物、锌化物及氢氧化铝、氢氧化镁。

26. The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic.

细晶、裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。

27. The high-temperature ductility deteriorates and intra-granular strength increases with an increases of dynamic precipitation of carbide.

结果表明：晶内强度随碳化物动态析出量的增加而上升，高温塑性随之而降低。

28. In many medium-hard rock stratums, carbide alloy bit and steel ball percussion tools can be used together for higher ROP and better coring result with borehole deflection preventing.

在大量遇到的中硬岩层中采用硬质合金钻头+球体冲击器实现回转冲击钻进可明显提高机械钻速和取心效果，并防止孔斜，具有很好的推广前景。

29. MIM of cemented carbide adaptor of bayonet have been investigated.

研究了硬质合金刺刀座注射成形工艺过程。

30. MIM of cemented carbide adaptor of bayonet have been investigated.

研究了硬质合金刺刀座注射成形工艺过程。

31.silicon carbide fibre

碳化硅纤维

36.2001年:开始为标致雪铁龙汽车集团的柴油机机车生产碳化硅过滤器。

Production launch of silicon carbide particulate filters for the PSA Peugeot Citro? n Diesel vehicles.

-- 来源 -- companyads.51job.com

37.\"For sewage and wastewater applications, the standard Silicon Carbide vs. Silicon Carbide lower seal face combination is the ideal choice.\"

对于污水和废水处理领域,标准金刚砂(碳化硅)和金刚砂(碳化硅)低密封面组合是一个理想选择。

-- 来源 -- 英汉 - 翻译样例 - 产品

38.(trade mark) an abrasive composed of silicon carbide crystals.

（商标）由金刚砂晶体构成的研磨剂。

-- 来源 -- 汉英 - 翻译参考

39.silicon carbide paper

水磨砂纸

-- 来源 -- 英汉 - 翻译样例 - 工程

40.The outer mechanical seal shall be constructed with a solid block silicon carbide rotating seal face and a solid block silicon carbide stationary seal face.

外置的机械密封应该采用一块整体结晶碳化硅旋转密封面和一块整体结晶碳化硅固定密封面。

-- 来源 -- 英汉 - 翻译样例 - 产品